BATTERY POWER DISPLAY
-Battery symbol displays in the bottom right corner.
-Put the power switch in ON position.
Full power
Half power
Lower power
Insufficient power
-Please recharge immediately when the power is low
BASIC OPERATION
To turn ON the unit
(
1
)
Turn on the power by putting the switch to the ON position.
(
2
)
The LCD will light up, the battery power will be displayed in the bottom right
corner of the screen and the information of previous recordings will show up if
there are any.
(
3
)
Check to see if the battery is full.
(
4
)
Check to make sure the recording key is turned off before starting up the unit
in order to avoid other problems.
To Turn OFF the unit
(
1
)
Please turn off the unit if it isn’t used for a long time
(
2
)
Move the power switch to the OFF position to turn off the machine.
(
3
)
When the unit is in Pause mode, the machine will turn off automatically if there is no activity
for 5 minutes.
(
4
)
The machine will turn off automatically when the power is used up and all recording files will
be saved automatically.
Recording
In whatever status, press “REC” to start recording and press “play” to pause
(recording indicating light blink); in recording condition, press “REC” to save the
recorded file and then press “play” to play the recorded file.
Summary of Contents for SY-1707
Page 1: ......