8
BLUETOOTH OPERATION
1.
Press the
MODE
button to switch to the Bluetooth mode.
2.
The previous paired device will connect to speaker tower
automatically when each time changing to Bluetooth mode.
3.
Turn on the Bluetooth device (e.g. phone) and enter the Bluetooth
search interface.
4.
Search
“SY-X255BTCD”
and pair it, input the password "
0000
" if
necessary. If paired, the display will blink steadily.
5.
If it still doesn't work, reset the Bluetooth and follow above steps again.
NFC OPERATION
1.
Press the
MODE
button to enter the Bluetooth mode.
2.
Place the back of phone (with NFC function) on the position of word
“NFC”
on the front panel of the unit for 3 seconds, the Bluetooth
function of the phone is activated automatically.
3.
When the indicator lights steadily and you can hear an audible signal,
they are paired.
4.
To disconnect NFC Bluetooth connection, place the back of the phone on
the position of the word “NFC” on the front panel of the unit. When
there comes an audible signal, they are disconnected.
5.
Some devices of Android system 4.0 or below need to install the
NFC.apk to enable the NFC function. Some devices may be in a weak
compatibility for NFC function, which may relate to the NFC software.
USB OPERATION
1.
Power on the unit and insert a USB Flash Drive (not supplied) into the
USB Port, ensuring the plug is fully inserted at the correct way.
2.
Press the
MODE
button to switch to the USB mode.
3.
The tower will play music from the USB automatically.
4.
The maximum size of Flash Drive that can be connected is 32GB max.
5.
The supported format for USB play is MP3.
6.
The 2
nd
USB port charges electronic devices through 5V, 1000mA. (1A
only)
5V 500mA
Phone with NFC
NFC sensor
USB
5V1A FOR
CHARGE
All manuals and user guides at all-guides.com
