'Power Bar'
mains distribution panel offer some degree of
protection from damage to equipment due to the hazards described
above.However, if you require absolute security from damage due to
excess voltage, the only solution is to disconnect the unit from the mains
power supply and any aerial systems.
To avoid the risk of damage by overvoltages we recommend to
disconnect all cables from this device and your HiFi system during
thunderstorms.
All mains power supply and aerial systems to which the unit is connected
must meet all applicable safety regulations and must be installed by an
approved electrical installer.
Approval and
conformity
with EC
directives
In its original condition the unit meets all currently valid European
regulations. It is approved for use as stipulated within the EC.
By attaching the CE symbol to the unit
declares its conformity the
EC directives (See page 18) and the national laws based on those
directives. The original, unaltered factory serial number must be present
on the outside of the unit and must be clearly legible! The serial number
is a constituent part of our conformity declaration and therefore of the
approval for operation of the device. The serial numbers on the unit and
in the original
documentation supplied with it (in particular the
inspection and guarantee certificates), must not be removed or modified,
and must correspond. Infringing any of these conditions invalidates
conformity and approval, and the unit may not be operated within the EC.
Improper use of the equipment makes the user liable to penalty under
current EC and national laws. Any modifications or repairs to the unit, or
any other intervention by a workshop or other third party not authorised
by
, invalidates the approval and operational permit for the
equipment. Only genuine
accessories may be connected to the unit,
or such auxiliary devices which are themselves approved and fulfil all
currently valid legal requirements. When used in conjunction with
auxiliary devices or as part of a system this unit may only be used for the
purposes stated in the section
'
Approved usage
'.
Disposing of
this product
The only permissible method of disposing of this product is to take it to
your local collection centre for electrical waste.
FCC
Information to
the user
(for
use
in
the
United
States
of
America only)
Class B digital device
– instructions:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different form that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Summary of Contents for AMP 8
