background image

32

Safety notes

 

All  components  used  in  this  device  meet  the  current
German  and  European  safety  norms  and  standards.  For
your own safety please be sure to read right through these
operating instructions. It is especially important to observe
the  safety  notes  and  the  instructions  regarding  setting  up
and operating the equipment.

 

We  are  able  to  guarantee  that  our  products  are  of  the
highest  quality,  and  meet  all  our  specifications  in  full,
because  we  carry  out  strict  quality  checking  of  all
materials,  employ  painstaking  production  methods
controlled  by  highly  qualified  staff,  and  carry  out  a  fully
automatic,  computer-controlled  final  quality  control
procedure.

 

Please  read  right  through  these  operating  instructions
carefully  before  you  attempt  to  use  your  new  equipment.
Note in particular the information regarding setting up and
operating the unit, and the safety notes.

 

The machine must be set up in such a way that there is no
chance of anyone - especially children - touching the back
panel  connections.  Be  sure  to  observe  the  notes  and
instructions in the chapter entitled 

'

Installation, Using the

unit for the first time, Safety notes

'

.

 

Liquid or foreign bodies must never be allowed inside  the
case through the ventilation slots. Voltage is present inside
the unit, and there is a risk of electric shock.

Protect  the  unit  from  drips  and  splashes  of  water;  never
place flower vases or other vessels containing fluids on top
of the case.

 

This  device  should  never  be  used  without  proper
supervision. The machine should be set up well out of the
reach  of  small  children.  This  applies  to  all  electrical
equipment.

 

 

CAUTION !

 The unit should only ever be opened by a
qualified specialist technician.

 

Repairs and fuse replacements should be entrusted to an
authorised 

 specialist workshop.

 

With  the  exception  of  the  connections  and  procedures
described  in  these  instructions,  no  work  of  any  kind  may
be carried out on the machine by unqualified persons.

 

If  the  unit  is  damaged,  or  if  you  suspect  that  it  is  not
functioning  correctly,  immediately  disconnect  the  mains
plug  at  the  wall  socket,  and  ask  an  authorised 

specialist workshop to check it.

 

Approved usage

 

This device is designed exclusively for reproducing sound
and/or  pictures  in  the  domestic  environment.  It  must  be
operated  in  a  dry  indoor  room  which  meets  all  the
recommendations stated in these instructions.

 

Where  the  equipment  is  to  be  used  for  other  purposes,
especially  in  the  medical  field  or  for  any  purpose  where
safety  is  an  issue,  it  is  essential  to  establish  the  unit’s
suitability for this application with the manufacturer, and to
obtain prior written approval for such usage.

 

  equipment  which  includes  a  radio  or  television

receiving  section  must  be  operated  within  the  regulations
laid down by the Post Office and the Telecommunications
authorities in the country in which it is used. This unit may
only  be  employed  to  receive  or  reproduce  those
transmissions  which  are  intended  for  public  consumption.
The reception or reproduction of other transmissions (e.g.
police radio or mobile radio broad-casts) is prohibited.

 

Device  approval  and  conformity
with EC directives

 

In  its  original  condition  the  unit  meets  all  currently  valid
German and European regulations. It is approved for use
as stipulated within the EC.

 

By  attaching  the 

  symbol  to  the  machine, 

declares  its  conformity  with  the  EC  directives

RI 89/336/EEC

amended 

by 

RI 91/263/EEC

 

and

RI 93/68/EEC

and 

RI 73/23/EEC

amended 

by

RI 93/68/EEC

,  and  the  national  laws  based  on  those

directives.

 

The  original,  unaltered  factory  serial  number  must  be
present  on  the  outside  of  the  unit,  and  must  be  clearly
legible.  The  serial  number  is  a  constituent  part  of  our
conformity  declaration  and  therefore  of  the  official
approval for operation of the device.

 

The serial numbers on the device and in the original 

documentation  supplied  with  it  (in  particular  the
inspection  and  guarantee  certificates),  must  not  be
removed or modified, and must match exactly.

 

Infringing  any  of  these  conditions  invalidates 

conformity  and  approval,  and  the  unit  may  not  then  be
operated  within  the  EC.  Improper  use  of  the  equipment
renders  the  user  liable  to  penalty  under  current  EC  and
national laws.

 

Any  modifications  or  repairs  to  the  unit,  or  any  other
intervention  by  a  workshop  or  other  third  party  not
authorised  by 

,  invalidates  the  approval  and

operational permit for the equipment.

 

Only genuine 

 accessories may be connected to the

DVD  player,  or  such  auxiliary  equipment  which  is  itself
approved,  and  fulfils  all  currently  valid  legal  require-
ments.

 

When  used  in  conjunction  with  auxiliary  devices  or  as
part  of  a  system,  this  device  may  only  be  used  for  the
purposes  stated  in  the  section  entitled 

'

Approved

usage

'

.

 
 
 
 
 
 
 
 
 
 
 

Care of the DVD player:

 

Always disconnect the unit from the mains supply before
cleaning it.

 

The  surfaces  of  the  case  should  be  wiped  clean  with  a
soft, dry cloth only.

 

Never use abrasive or solvent-based cleaners!

 

Before switching the unit on again check carefully that no
short-circuits exist at the terminals, and that you have not
disturbed any connections.

Summary of Contents for CD 820 M





































Reviews: