40
Operating the D10
Switching on
Move the main switch on the machine’s front panel to the
ON position: the
D10
now initiates the power-on se-
quence, during which the valves are heated gradually to
avoid premature deterioration. During the power-on and
heating phase the on-screen
symbol flashes.
As soon as the
D10
is ready to use, the signal output is
released, and the machine is ready for playback.
When using the unit in conjunction with the
V10
amplifier
Move the main switch on the machine’s front panel to the
AUTO position. Switch the
V10
on and select
'DISC'
as
signal source. The
D10
now automatically switches itself
on. When the power-on delay period has elapsed, the
D10
is ready for playing discs.
Inserting a Disc
1. Swing the lateral actuating lever back in order to open
the mechanism cover. Move the mechanism cover to
the vertical position.
2. Place the disc in the holder
with the side to be
played facing down
.
Mechanism cover
Actuating lever
LED
3. Close the mechanism cover with the actuating lever.
When the cover is closed, the machine reads and
checks the disc. The laser is then calibrated accu-
rately to match the characteristics of the disc. During
the reading process the screen displays the message
'READING'
. The inserted disc is now thoroughly
examined and the laser is exactly calibrated accord-
ing to the surface condition and the reflectivity of the
disc. The extremely precise calibration performed by
the
D10
takes a few seconds. It guarantees a perfect
and error free read out process and thus the highest
possible sound quality.
After the reading process the screen displays the
message
'STOP'
and the number of tracks on the
disc. The disc is now ready for play-back.
Removing the Disc
Stop the play back process first by pressing the
button. Wait until the disc has stopped turning and the
LED near the mechanism cover lits.
After the disc has come to a complete stand still, open
the mechanism cover with the actuating lever and
remove the disc.
CAUTION
Never open the mechanism
cover before the disc has com-
pletely stopped turning and the
LED near the mechanism cover
lits.
Otherwise the disc could slip
from the disc platter and it
could be damaged.
Note:
Please never touch the lens of the pick-up optics below
the slit in the disc compartment. The optics is very
susceptible and could easily be de-adjusted.
Never apply any mechanical force to the thin cover plate
above the optical pick-up. This could easily lead to a
deformation of the cover plate and block the pick-up
movement.
Summary of Contents for D 10
