17
Source names
menu item
At this menu item you can activate and disable external sources, and assign a
plain text name to each source; this name then appears in the screen displays.
When you call up this menu item using the
button, a list of all the
external sources of the
MP 3100 HV
appears. Each source is followed by the
assigned name, or if you have disabled the source concerned the note
'
disabled
'
.
If you want to activate / disable a source, or change the plain text name,
navigate to the appropriate line.
To activate a source, press the green
button; pressing the red
button disables the source.
To change the plain-text name, move to the appropriate line and press the
button. Now use the alpha-numeric keypad of the
FD100
to change the
name as required, then confirm your choice with
; this saves the
settings for that source.
The
button is used to switch between numeric and alpha-numeric input,
and between capitals and lower-case letters.
Letters can be erased by pressing the
button.
If you should wish to restore the factory default source name, erase the whole
name before saving the empty field with the
button: this action resets the
display to the standard source names.
The only available method of entering the name is to use the alpha-
numeric keypad on the remote control handset.
Display Brightness
menu item
(screen brightness)
At this point you can adjust the brightness of the integral screen to suit your
personal preference for normal use.
We recommend that brightness settings 6 and 7 should only be used when the
screen is difficult to read due to very bright ambient light.
A lower brightness setting will extend the useful life of the screen.
Display Mode
menu item
This menu item offers the choice between three different display operation
modes:
Always on
Temporary
Always off
Selecting
'Temporary'
will switch the display is on for a short while each time
the
MP 3100 HV
is being operated. Shortly after operation the display will be
switched off again automatically.
The brightness of the display can be adjusted separately with the menu item
'Display Brightness'
(see above).
Language
menu item
In this menu item you define the language to be used for the displays on the
screen of the front panel of the
MP 3100 HV
.
The language used for data transferred to the machine, e.g. from an Internet
radio station, is determined by the supplying device or the radio station; you
cannot define the language on the
MP 3100 HV
.
Device name
menu item
This menu point can be used to assign an individual name to the
MP 3100 HV
.
In a home network the device then appears under this name.
If an amplifier is connected via the
H
Link
connection, then the amplifier is able
to accept this name automatically, and display it on the screen.
The amplifier only accepts this name if an individual name has not already
been assigned at the amplifier itself.
Summary of Contents for MP 2000 R Mk II
