I N S T R U C T I O N M A N U A L
10
f)
Keep cutting tools sharp and clean.
Properly maintained
cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
g)
Use the power tool, accessories and tool bits etc.
in
accordance with
these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to be
performed.
Use of the power tool for the operations different
from those intended could result in a hazardous situation.
2.5 Service
Repairs must be carried out by an authorised T-DRILL service
agent
– This electric tool complies with the relevant safety requirements.
Repairs should be carried out only by certified persons using original spare
parts; otherwise, this may result in considerable danger to the user.
2.6 Safety instructions for tee forming
Do not touch the rotating tool when the work cycle is in
progress.
Mind your fingers.
When fixing the machine to the tube, be careful not
to leave your fingers between the machine and the tube.
Use protective gloves.
When handling the tools, be careful with the
cutting blades.
Use protective shoes.
A falling machine or tool may damage your feet.
Use safety glasses
. Also use a face or dust mask if the cutting operation
creates dust.
Use protective gloves.
Lubricating oil may irritate the skin.
Pay attention to adequate ventilation.
The fumes emitted by the
lubricant may irritate your eyes and respiratory system.
Familiarise yourself with the contents of the safety data sheet
regarding the lubricants.
Provide adequate protection
in order to prevent damage. Loose chips
are hot and sharp.
Summary of Contents for T-35
