Total no. of pages: 30
PAGE 26
Anleitung EAG80_26_00_2017_03_28_GB
Version 28.04.2017
7.3.1
Connection of weighing elements
Up to four weighing elements can be connected to devices without prewired plugs. The terminal block (1)
has been prewired to the mainboard.
Weighing elements T.E.L.L. TWE-1/1,5t/ 3t/ 3,4t/ 5t/ 10t/ 15t /VBB14/ VBB18
(4-wire connection cable, transparent):
UB+
= Supply weighing element plus
<->
Weighing element green
UB-
= Supply weighing element minus
<->
Weighing element yellow
U In+ = Measurement signal plus
<->
Weighing element brown
U In- = Measurement signal minus
<->
Weighing element white
Weighing elements TWEH 550kg/ 1100kg/ 1760kg (6-wire connection cable, transparent):
UB+ = Supply weighing element plus
<->
Weighing element green + blue
UB- = Supply weighing element minus
<->
Weighing element black + grey
U In+ = Measurement signal plus
<->
Weighing element white
U In- = Measurement signal minus
<->
Weighing element red
Weighing elements CO/FX/TA (4-wire connection cable, black):
UB+ = Supply weighing element plus
<->
Weighing element red
UB- = Supply weighing element minus
<->
Weighing element black
U In+ = Measurement signal plus
<->
Weighing element green
U In- = Measurement signal minus
<->
Weighing element white
7.3.2
Connection of inputs
Connection of inputs (Attention! Solely connect potential-free contacts!)
GND/In1 = input 1
GND/In2 = input 2
7.3.3
Connection of outputs
Connection of outputs (24V DC max. 5A, normally open) for dosing and sorting programs.
