33
PROBLEMS
POSSIBLE CAUSES
SOLUTIONS
Your iron
produces little
to no steam.
The water tank is empty.
Fill it up.
The anti-limescale collector
is dirty.
Clean the anti-limescale collector.
Your iron is clogged up with
limescale.
Clean the anti-limescale collector and
steam chamber.
Your iron has been used for too
long in the dry ironing function.
The chosen temperature is too
low and does not allow the
formation of steam.
Clean the steam chamber.
See the chapter “Adjusting the
temperature and steam”.
The soleplate
is scratched or
damaged.
You have placed your iron on a
metallic iron rest or ironed over
metal zips or fasteners.
Always place your iron on its heel rest
when not in use.
Do not iron over metal zips or fastners.
The iron steams
once the water
tank has been
filled.
The steam control dial is not
set to .
Ensure that the steam control dial is
set to .
The water tank is too full.
Do not exceed the max level for filling.
The spray does
not spray water.
The water tank is not full
enough.
Add water to the water tank.
If you have any problems or queries please call our Customer Relations
team first for expert help and advice: consult our website for contact details
www.t-fal.com