4
of maintenance. Complying with the installation and maintenance information contained in the present operating
instructions will therefore considerably contribute to a long lifecycle of these wearing parts.
In case of complaints, we reserve the option of repairing or replacing the defective parts or replace the entire device.
Replaced parts will pass into our property.
Claims for liquidated damages are excluded unless they are caused by wilful acts or negligence on the side of the
manufacturer.
The warranty does not provide for any claims beyond those referred to above. The warranty claim has to be evidenced
by the purchaser in the form of the submission of the sales receipt. The present warranty commitment is valid in the
country in which the device was purchased.
Please note:
1. Should your device fail to function properly, please verify first whether an operating error or another cause is present
which cannot be attributed to a defect of the device.
2. In case you have to take or send in your defective device for repair, please be sure to enclose the following
documents:
- Sales receipt (sales slip).
- A description of the occurring defect (a description as accurate as possible will expedite the repair work).
3. In case you have to take or send in your defective device for repair, please remove any attached parts which do not
belong to the original condition of the device. If any attached parts of this kind should be missing upon the return of the
device, we shall not be liable for them.
8. Service
In the case of warranty claims or malfunction, please contact your point of sale.
9. How to order spare parts
The fastest, most simple and cheapest way of ordering spare parts is through the internet. On our www.tip-pumpen.de
website you will find a convenient spare part shop where you can order spare parts with just a couple of clicks. In
addition, this is also the place where we publish comprehensive information and valuable tips on our products and
accessories, introduce new devices and present current trends and innovations in the range of pump technology.
9.1.
Spare part list (fig. 1)
Part
no.
Spare part
item no.
Description
Part
no.
Spare part
item no.
Description
2
72022
Ballast UV-C emittter
13
72024
Quartz glass piston for UVC emitter
3
71970
Threaded ring, UVC emitter - holder
14
71975
O-ring for quartz glass piston
4
71872
Cable holder, UVC
15
71976
UVC emitter housing
5
71873
Thrust washer - UVC emitter
16
71885
Seal for UVC emitter (inflow and outflow)
6,7
71971
Connection unit, incl. Interrupt switch, UVC
17
71977
UVC inflow hose adapter 20-25 mm
8
71875
Earth plate, UVC
18
71978
Threaded ring, UVC emitter - inflow
9
71876
Holder - UVC emitter
19
71981
Threaded ring, UVC emitter - outflow
10
71878
Fastening screw - earth plate (2 x)
20
72025
clamping bracket
11
72023
UVC tube 13 W (G 23 base)
21
72137
Fixing screws
12
71973
O-ring for protective quartz glass
22
71881
ellbow connection 25 mm
Attachement
Fig. 2
Details
15 UV C housing
24 UV-C-emitter outlet
27 Power cord
20 clamping bracket
25 Function control (blue)
28 Ballast UV-C emittter
23 mounting holes
26 UV-C-emitter inlet
For EC countries only
Please do not dispose of electrical appliances in the regular domestic waste!
According to the European Directive 2002/69/EC regarding waste electrical and electronic equipment
and the implementation of that directive into national law, electrical devices have to be collected
separately and disposed off in an environmental-suitable manner after the end of their life cycle.
Should you have any questions, please contact your local waste disposal company.
8
