Description
1)RELAY control the start and closeness of the
relay,in order to control the circle
2) Only the center number can operate.
3
）
the device only cut off the oil circuit on the
condition of the driving speed below 20KM/H
and in Positioning state.
4)If it currently do not meet the condition, the
device will reply “Do not allow to cut off the oil
and power’’It declares that the driving speed
above 20km/h at this moment ,please try again
a little latter.
Feedback
Relayed enable OK!
(5) LISTEN
Command
Parameter
Sample
Parameter1
LISTEN,1#
LISTEN,1#
turn on
Parameter2
LISTEN,0#
LISTEN,0# turn off
