T-Mark T2-1, User Manual

Format

PARAM#

PARAM#

Description

This  instruction  is  used  to  query  the  parameters  and 
default parameters set by the device.

Feedback

IMEI:351190012535936      IMEI
APN:cmnet                            APN
IP:www.gps18.com:7700 

IP and port

CENTER:13800138000      Center number
TIMER:10S                            Moving uploading interval
LANGUAGE:EN                    Language(CN/EN)
GMT: E8                                Time zone(E/W)

Other application instructions please contact the seller

8. Monitor

8.1 Dial the terminal number with the center number (the number used by 
the terminal must have caller ID function). After dialing and ringing for 10 
seconds,  the  terminal  will  automatically  connect  and  start  monitoring. 
One  monitoring  time is  3  minutes.  If  you  need  to  continue  monitoring, 
please dial the device number again. The monitoring state is turned on by 
default;
8.2  Set  to  turn  off  the  monitoring:  send  SMS  command  to  turn  off  the 
monitoring function

9. Charging reminder

Equipment using the built-in charging head and line charging, cannot be 
used  indiscriminately  charging  line  charging,  because  we  have  fast 

(17)    STATUS

Command

Parameter

Sample

STATUS

STATUS#

STATUS#

Description

The command is designed for checking the device’s 
working status.

Feedback

BATTERY:100%                    -- Battery status (SOC)
GSM Signal: strength            --GSM Signal strength
GPS:FIXED                            --GPS Location condition
GPS Signal: strength          --GPS Signal strength
Listen:OFF                              -- Listen status
Vibration:0                              --Vibration alert status
Work mode:1                          --Work mode staus     
Voltage : 4.18                          -- battery voltage (volts)