background image

T-MAX
UTV SERIES

DANGER

!

CAUTION

!

WARNING

!

01

INTRODUCTION

Thanks for your interesting in T-MAX Products, especially the ATW6000, and 
we sincerely hope that it will satisfy you. We not only have the professional 
capability  to  design  winches  but  also  with  comprehensive  after-sale 
service.  Please  do  not  hesitate  to  contact  us  for  any  further  messages  or 
suggestions.

Please  do  tell  us  the  following  information  when  you  need  to  replace  any  parts  of 
winch:
1. The series no. of winch, for instance 88808290001 which is shown no the top of 
the winch base.
2. The item no. of winch spare parts which is listed on the table of winch spare parts.
3. The exactly description of winch spare parts.
 

GENERAL SAFETY PRECAUTIONS

Please  read  and  understand  this  owner’s  manual  before  installing  and  using  your 
new winch. Pay particular attention to the General Information. Your winch is a very 
powerful machine. If used unsafely or improperly, there is a possibility that property 
damage  or  personal  injury  could  result.  We  have  included  several  features  in  this 
winch  to  minimize  this  possibility.  However,  your  safety  ultimately  depends  on  your 
caution when using this product. 

As  the  operator  of  this  product  the  responsibility  for  safe  operation  ultimately  lies 
with  you.  It  is  imperative  that  you  read  and  understand  all  of  the  safety  precaution 
instructions  prior  to  installing  and  operation  your  winch.  Failure  to  understand  the 
proper operation of this product can result in serious injury and/or property damage.

                               Indicates a hazardous situation which, if not avoided, will result in 
death or serious injury.
                             
                               Indicates a potentially hazardous situation which, if not avoided, 
will result in death or serious injury.
                             

                      

Indicates a potentially hazardous situation which, if not avoided, 

may  result  in  minor  or  moderate  injury.       The  notation  is  also  used  to  alert  you  to 
unsafe practices.

Summary of Contents for 7305100



















Reviews: