T-MAX ATW 6000, Fitting Instructions Manual

T-MAX
UTV SERIES

                                                    Figure 7

Step (2)
Open  up  the  package,take  out  the  winch  and  winch  spare  parts,then 
mount  the  winch  as  following  figure.  Let  the  mounting  bolt  through 
the  holes(which  is  drilled  in  Step(1))  and  the  mounting  plate  from  the 
bottom up.

Note: To use the mounting bolts (M10x35mm)and washer 0.4inch(10mm) 

which are supplied by T-MAX.

Step (3)
Turn the clutch handle to the direction of “out”;
Let the wire rope through the roller fairlead;
To connect the clevis hook on the wire rope;
Turn  the  clutch  handle  as  90°reversely  to  the  direction  of  “in”  to 
engaged the clutch;

Note: To turn the drum slightly,the cluch is engaged if it could not be 

turned;or to repeat as”a” once more;

To fix the roller fairlead on the mounting plate.

Note: If the rope is synthetic rope, you can fix the aluminum fairlead on 

the  mounting  plate,  and  then  reel  the  rope.  Please  see  the  method  of 
how to do that as the attached interleaf.

11