Using team functions
135
Step by Step
Using team functions
If configured (consult your service personnel), your telephone is part
of a team. The team consists of internal phones that are able to use
certain functions.
Activating/deactivating a group call
If configured (consult your service personnel), you belong to one or
more groups of stations, which can be reached via hunt group or
group call station numbers.
Incoming calls are signaled one after the other (= hunt group) or si-
multaneously (= group call) on all phones in the group, until a group
member answers the call.
You can also belong to a team (including executive/secretary config-
urations) in which station numbers are programmed on trunk keys
Every group member can still be reached at his or her personal
phone number.
You can activate and deactivate the audible signal for a hunt group,
group call or individual trunks in a group (including executive/secre-
tary).
If the LED on a programmed "Hunt group" key is illuminated
page 81, this means that the audible tone was activated for at
least one group.
c
Open the idle menu
Select and confirm the option shown.
[1]
.
or
Select and confirm the option shown.
or
S
or
R
Press the "Hunt group".
This function is not available for the executive phone in
team/executive/secretary configurations.
Special features must be taken into consideration if your tele-
phone operates with IP-Netpackage (system networking via
PC network)
Leave group
[1] ”Differing display view in a Octopus F900 environment”
Join group
