5
05 ASSEMBLY
1.
Content
(Figure 1)
2.
Take out the frame and spread.
(Figure 2)
(Figure 1)
(Figure 2)
3
Body: 1PC
1
Propeller: 2 Pairs
4
Landing gear: 2 Sets
2
Motor accessories: 1 bag (GPS stick*1, 3M tape*5, motor accessories*4 )
5
Gimbal parts: 1 bag (gimbal hook*4, M2.5*8 screw*4, M3*8 screw*4)
6
3.
Spread the arms to 180 degrees and turn the folding rings as per the instruction and secure the arms.(Make sure the
arms are lined up with the frame, otherwise, they might get stuck and cause damage to the thread. )
(Figure 3)
4.
Assemble the landings gears to the frame as per Figure 4.
(Figure 3)
(Figure 4)
1
2
3
4
5