background image

TREMSTER

Tremster is an effect that imitates the buttery seductive tone from a vintage tube amp tremolo/vibrato.

The MODE -button allows you to switch between Tremolo an Vibrato effect.
The tremolo effect works like a repeatedly radical change in volume
The vibrato effect has a more subtle volume change.
The DEPTH -knob controls the depth of the volume-oscillation.
The VOLUME -knob sets the overall volume
In mid-position (twelve o’clock) the volume level is 1:1. When turned full over (clockwise) the input signal 
is boosted 15dB.
The SPEED -knob determines the oscillation speed.

Controls: 

 

MODE, DEPTH, VOLUME and SPEED.

Connections:   

INPUT-Jack 6,3 mm. OUTPUT-Jack 6,3 mm.

 

 

 

DC-Jack 2 mm pin. Center is minus (ground)

Power supply:   

9-12 Volt DC or battery 9 Volt Alkaline. When using a Power Supply, you don’t 

 

 

 

have to put in a battery.

Effect usage:   

20 mA

Weight:    

 

499 gram packed in box.

Open the battery-cover on the back using a flat-tipped screwdriver in the slot. Remember to position the 
battery correctly.

USER’S MANUAL

TREMSTER

Congratulations on the purchase of your new T-Rex pedal

T-Rex grants a 2-year warranty against defective parts or workmanship. 
In the event of a defect, please contact the nearest T-Rex dealer.

T-Rex Engineering ApS, Tel.: +45 75 72 71 81, Fax: +45 75 72 71 98

www.t-rex-engineering.com, mail: info@t-rex-engineering.com

Summary of Contents for BETAVIBE












Reviews: