During playback, the looper will mute the last recording. You can press
and hold R/P again to un-mute it (redo) or simply press R/P to re-record.
During recording, undo´ing will simply take the looper back to the pre-
vious playback without saving the audio. It´s a quick way to erase and
re-record your audio (if you made a mistake, for example).
Note:
Undo/redo is only possible when two or more recordings have been
saved in memory.
Clear memory:
When in stop mode (see STOP section), press and hold the S/C switch.
Both leds will blink five times, indicating that the memory has been
cleared. You can press R/P to start all over again.
Hint:
If you want to keep the loop(s) stored in memory after unplugging
the power, make sure you are in stop mode before doing so. Unplugging
the power while recording or playing back will clear the memory and the
audio loop(s) will not be saved.
PLAY
REC
PLAY
REC
PRESS + HOLD R/P
PRESS + HOLD R/P
PRESS R/P
PRESS R/P
PRESS R/P
PLAY
PLAY
REC
PRESS + HOLD R/P
PRESS R/P
PRESS R/P
STOP
START
REC 1
PLAY 1
REC/PLAY 2,3,4...
PRESS + HOLD S/C
PRESS R/P
PRESS R/P
PRESS R/P
Undo/redo during playback
Undo when recording
you are here
you are here
Clearing looper memory
you are here
