11
5.
Installation guide
The following requirements should be paid attention to when choosing installation location:
1)
Try to install in a dry and ventilating place. Avoid installing in a damp and hygroscopic place.
2)
Try to avoid being exposed to sunlight or rain; avoid an ambient temperature higher than 60°C and a relative
humidity higher than 95%.
3)
Choose a place with easy access to maintenance and movement.
5.1.
Installation of battery
T-ROBOT adopts two durable Li-Ion batteries. The running distance before recharging reaches up to 30 km (it will
be different depending on land form, riding style and load). In addition, the batteries require a low maintenance cost
and provide a long service life. These two batteries are installed underneath the base. The installation shall be
conducted bottom-up as is shown in Fig. 4.
Fig. 4 Battery installation diagram
Note:
Check the battery status when installing. If any damage or leak is found, please do not install and contact the
after-sales service personnel immediately.
Make sure the base jack corresponds to battery interface when installing the batteries. Avoid reverse
installation.
After correct mounting of batteries, secure them on the base according to Fig. 4; check if there is any
looseness.
