28
36.
Always make sure the power is switched off before handling T-ROBOT. The handling procedure should be as
per this manual.
37.
Make sure the plug is already removed and power is switched off before starting maintenance for T-ROBOT.
38.
Handle the battery gently and carefully. Avoid crushing or falling to protect the shell against damage.
39.
Don’t use the chargers or other accessories that are not specially designed for the product of our company.
Our company shall not assume any responsibility for any accident due to failing to follow this.
40.
Don’t retrofit T-ROBOT without permission. Failing to follow this can bring potential safety hazard and void
the warranty. Our company shall not assume any responsibility for the loss due to dismantling and retrofit of
T-ROBOT without authorization.
41.
When riding in a rainy/snowy condition, try to avoid wetting the switches and plugs to prevent leakage of
electricity. Switch off the power timely when you are not riding. Don’t let T-ROBOT squatter. If the water
level exceeds the controller, power circuits or batteries, it can cause short circuit and damage of electrical
device. Please pay attention to it.
42.
Don’t wash with water when cleaning so as to prevent the internal electronic components and circuits causing
safety problems due to wetting.
43.
Carry out cleaning with a neutral cleaner. Use a cleaning cloth to softly wipe smut off the surface of paint or
plastics, and then use a dry cloth to wipe it clean.
44.
Don’t open the base.
45.
Don’t open the gear case.
46.
Don’t ride T-ROBOT amid dangerous gases so as to avoid fire or other problems.
47.
T-ROBOT should avoid being exposed to sunlight for prolonged time. Store it in a cool place. The direct
sunlight can accelerate degradation of the paint, plastics, rubber parts and electronic components, reducing
their service life and reliability.
48.
T-ROBOT is not suitable for long-distance running.
49.
Keep T-ROBOT tires in contact with the ground constantly.
