ATP/ASP/ASUP Price computing scales operation manual
REV: C1, June 2012
ATP/ASP/ASUP Price computing scales operation manual
3. GENERAL INSTRUCTION
1
．
When battery goes low, the indicator will be turned on
automatically. It is the time to charge the battery with the AC power. If
scale goes on being used without proper charging, the display window
will show “BAT LO” every 10 minutes, and
scale would be shut down
automatically after 50 minutes of warning in order to protect the battery.
Please charge the battery immediately, or scale cannot be used. To
charge battery, just plug AC adapter or main power cord, scale turn on
power is not necessary.
2
．
There is an LED under total price display window (ATP/ASP) or
under P30 key of PLU keyboard (ASUP) to indicate the status of battery
charging. If the LED is green the battery has a full charge. and red
indicates the battery is being charged. please keep charge battery at
least 1 hour after LED turn to green to insure full charge.
3
．
Before starting using scale, please check if the bubble is in the middle
of the level ; if not, please make appropriate adjustment.
4. BASIC OPERATION
4. 1 Zero the scale
When there is no item on the scale but reading is not zero, press
the
ZERO
key to turn on
ZERO
indicator. When the weight
goes over 2% of the full capacity, “read zero” function is
obsolete.
4. 2 Tare
Put container on the platter, once the weight reading is stable,
press the
TARE
key, the TARE indicator will be on and the
container’s weight will be deducted. When it is time to clear the
TARE, take off the container, and press
TARE
key again.
-2-
4. 3 Overload Warning
Please do not add item that is over the maximum capacity.
When reading “—
OL
—“ and hear beeping sound, remove the
item on the platter to avoid damage to the load cell.
4. 4 Unit price setting
To trade with your scale, it is necessary to setting a unit price of
the goods, scale then uses this unit price to determine how
much that goods are on the platter.
When scale displaying the weight of the goods placed on the
scale, set the unit price through numeric keys. Set unit price is
showed in
UNIT PRICE
window display,
TOTAL PRICE
window
display shows the total price of the goods. To cancel the
previous unit price, press
C
key .
4.5 Change unit
You can use the
UNIT
key to change unit. Press
UNIT
key will
change the weighing unit circularly, and the pertinent indicator
will on.
5. ACCUMULATOR OPERATION
5. 1 Prepare to accumulate
Each time before accumulate
，
please make sure the platter is
empty, the current accumulator values is reset to zero, and the
weight reading is stable.
5. 2 Accumulative operation
Put the weighing item on platter
，
wait for the weight reading to be
stable, press the
M+
key
，
the window will show
total x
，
this is
current total value.
-3-
