Page
12
Version:
T-800
When using electrical equipment, basic safety precautions must be followed to
reduce the risk of fire, electrical shock, and injury to persons.
1. Read and follow all instructions before using the equipment.
2. Keep electrical cord out of heavy traffic area to avoid fire hazard. NEVER place
electrical cord under the rug, or near a heat generating device.
3. Always turn off the equipment before service.
4. Do not drop or insert any object into any openings.
5. Do not operate any equipment with damaged parts.
6. Any other use not recommended by the manufacturer may cause electrical shock
or injury to person.
7. Never use it outdoor.
8. Do not attempt to repair or adjust any electrical or mechanical
CLEANING INSTRUCTION
1. Turn off the unit and wait until the motor fully stops.
2. Hold whirlpool jet cover firmly and pull to separate from the round magnetic field.
3. Turn hydro whirlpool jet cover to the left to open and pull out the impeller.
4. Use Anti-Bacterial solution (EPA Registered) to clean all parts.
5. After sanitizing all parts, place impeller back inside and close hydro whirlpool jet
cover, turn right to lock the cover.
6. Firmly hold the whirlpool jet cover and gently place it onto the round magnetic
field. DO NOT release the hydro whirlpool jet cover until jet cover is on the round
magnetic housing.
INSTALLATIONS
