Step by Step
Making Calls – Convenience Functions
38
Speed Dial
Using Station and System Speed-Dial Numbers
Prerequisite: You have stored station speed-dial numbers
Page 38 or your service personnel has stored system speed-dial
numbers.
N
Press the key shown.
Select and confirm
j
Enter a speed-dial number.
"
*
0" to "
*
9" = station speed-dialing.
"000" to "999" = system speed-dialing (contact your service person-
nel).
If applicable
Suffix-Dialing
j
If necessary, you can suffix-dial additional digits (for example, the us-
er’s extension) at the end of the saved station number.
If this feature is configured, a suffix is automatically dialed
(for example, "0" for the exchange) if no entries are made within 4 or
5 seconds.
Storing Station Speed-Dial Numbers
You can store the ten numbers which you use the most and dial them
using your own station speed-dial numbers:
*
0 through
*
9
N
Press the key shown.
Select and confirm
1
.
j
Enter the speed-dial number you wish to use (
*
0 to
*
9). If the speed-
dial number is already in use, the programmed station number ap-
pears on the screen.
Confirm.
j
First enter the external code and then the external station number.
Confirm.
Use speed dialing
Change Speed Dial
[1] ”Different Displays in a Octopus F900 Environment”
Change
Save
