16
Safety instructions
Working with the
machine
First use only after instruction
The machine may at the first time of use only be brought into use by
employees of the dealer, factory representatives or employees of the
manufacturer. False use after bringing the machine into use without in-
structions can cause damages to the machine or accidents.
Take care of technical correct condition
Only bring the machine into use in a technical correct condition. Check
all important parts and replace defective parts before use. Defective
parts can cause material or personal damages.
Do not remove protective covers
The protective covers should not be removed or evaded. Check all
protective covers before using. Unprotected machine parts can cause
heavy or deadly accidents.
Prohibition of transporting people on the machine
Nobody and nothing shall be transported on the machine during trans-
port. Transporting of people or objects on the machine is perilous and
prohibited.
Check the direct surroundings
Before driving and bringing into use of the machine the direct sur-
roundings must be checked. Take care of sufficient view. Only start
driving when no persons or objects are in the direct surroundings. Per-
ilous injuries can occur.
Tighten bolts and nuts
Check bolts and nuts regularly for being tight and tighten if necessary.
Because of using the machine bolts can get loose. Damages to the
machine or accidents can be caused.
Behaviour at troubles
At functional troubles stop and secure the machine immediately. Rem-
edy the trouble immediately or commission a workshop. Continuing
working with the machine cause accidents or damages.
Blockage or operation of a security device
In case of a blockage or operation of a security device, never work on
the machine without
•
stopping the engine and
•
removing the ignition key
Never be tempted to hand feed or unblock the machine while it is run-
ning. Serious or deadly injuries can occur.
Summary of Contents for 7420
Page 5: ...Table of contents 5...
