Preparation for use
37
Table roller adjust-
ment
To ensure good stability of the bale during wrapping, the table roller
must be adjusted for small or large bales.
Recommended position, depending on the bale diameter:
To prevent the table roller from unintented moving:
> support the roller
> Remove the bolts
> Move the roller to the desired setting
> Tighten the bolts
> Remove the support of the roller
Front position
Rear position
Table roller
Bolts
Bale size (m) Recommended position
until 1.30
front
over 1.30
rear
Summary of Contents for 7420
Page 5: ...Table of contents 5...
