44
Road transport
Right wheel in trans-
port position
The right wheel must be in transport position.
> Remove the locking pin
> Remove the pin
> Place the wrench on the hexagon bolt
> Use the wrench to turn the wheel into transport position
> Place the pin
> Place the locking pin
> Remove the wrench
Checking the ma-
chine
Check the machine before road transport by means of the checklist:
•
The tractor hydraulic is switched off?
•
All valves are closed?
•
Crop residues and heavy dirt are removed?
•
Cables and lines are placed in that way they will not tension or get
in touch with the tractor rear tyres during curve driving?
Road transport
•
Before starting driving, check the close environment. Always take
care of a clear view and especially at children in the working envi-
ronment of the machine.
•
Lock the hydraulic valves of the tractor before road transport
•
Do not transport any persons or objects at the machine
•
Adapt the drive speed to the road conditions
•
Do not exceed the maximum speed of 25 km/h. Obey the national
and local speed limits.
•
Pay attention to sufficient driving and braking capacity. Then driv-
ing and braking capacity are influenced by the attached machine
(longer braking paths because of larger driving power).
Locking pin
Pin
Transport position
Hexagon bolt
Wrench
Summary of Contents for 7420
Page 5: ...Table of contents 5...
