2. Press again,will cancel call number on the Receiver T0918,the greem light will be off at the meanwhile.
③
Press the key on call button to add new button.
A.If need to name each key on call button,press Adjust key and Confirm key to choose the service
type.Then set next call button or choose “BACK” to exit.
B,If choose the fixed service types for different working environment,just need to set the calling number
and no need to set service type. Then set next call button or choose “BACK” to exit.
2)Delete button
①
Press Ajust key and Confirm key to enter “Del button” setting.
②
Press Ajust key to choose “Single remove “or “All remove”
A.If choose “Single remove “,press each call buttons to be deleted,then will show”Remove done”
B.If choose “All remove”,all the call buttons will be deleted within 5seconds.Then exit.
3)Vibrator switch
①
Press Ajust key and Confirm key to enter “Vibrator switch” setting.
②
Press Ajust key to choose “OFF”/ “ON”.
③
Press Confirm key to exit.
4)Time set
①
Press Ajust key and Confirm key to enter “Time set” setting.
②
Press Function key and Ajust key to choose the time.
③
Press Confirm key to exit.
5)Language
①
Press Ajust key and Confirm key to enter “Language” setting.
②
Press Ajust key to choose the Language.
③
Press Confirm key to exit.
6)Reset
①
Press Ajust key and Confirm key to enter “Reset” setting.
②
Press Ajust key to choose “Cancel”/ “Yes”.
③
Press Confirm key to exit.
C.Call Button T0818
1. Press the call button on the Transmitter T0818,the green light will on and Receiver T0918 will receive
the signal and show the number.
