User Manual 9250
2-4 Portrayal
WARNING
Do not attempt to float the output from ground as it may
damage the Model 9250 and your equipment.
WARNING
Input and output grounds are tied together and there-
fore, it is absolutely forbidden to connect the output
ground to a different level than the input ground. Failure
to adhere to this limitation may damage the 9250 and the
surrounding equipment connected to its I/O connectors.
Long Term Storage
or Repackaging for
Shipment
If the instrument is to be stored for a long period of time or shipped to
a service center, proceed as directed below. If repacking procedures
are not clear to you or, if you have questions, contact your nearest
Tabor Electronics Representative, or the Tabor Electronics Customer
Service Department.
1.
Repack the instrument using the wrappings, packing material
and accessories originally shipped with the unit. If the original
container is not available, purchase replacement materials.
2.
Be sure the carton is well sealed with strong tape or metal
straps.
3.
Mark the carton with the model and serial number. If it is to
be shipped, show sending and return address on two sides of
the box.
NOTE
If the instrument is to be shipped to Tabor Electronics
for calibration or repair, attach a tag to the instrument
identifying the owner. Note the problem, symptoms, and
service or repair desired. Record the model and serial
number of the instrument. Show the RMA (Returned Ma-
terials Authorization) order as well as the date and
method of shipment. ALWAYS OBTAIN AN RMA
NUMBER FROM THE FACTORY BEFORE SHIPPING THE
9250 TO TABOR ELECTRONICS.
