User Manual 9260
1-2 Portrayal
distributed differentially to both outputs. In this case, channel 1
output generates in-phase signal while channel 2 outputs an
inverted signal that has exactly 180
phase offset to the normal
output. Full amplitude and bandwidth is preserved when the 9260
operates in differential mode. Using the differential mode, the 9260
does not sacrifice accuracy, nor does it sacrifice bandwidth.
The 9260 has two additional inputs for each channel allowing
summation of two signals and providing an external control of DC
level offset. These inputs are accessible from the rear panel only.
9260 Feature
Highlights
Bench-top, all metal case
Large signal bandwidth to 30 MHz
Small signal bandwidth to 45 MHz
High amplitude to 34Vp-p (high impedance)
Peak current to 1A
Continuous output power to 10 W
Low distortion
Conventions
Used in this
Manual
The following symbols may appear in this manual:
Note
A Note contains information relating to the use of this product
TIP
A Tip contains information relating to the performance of this product
Caution
A Caution contains information that should be followed to avoid personal
damage to the instrument or the equipment connected to it.
Warning
A Warning alerts you to a potential hazard. Failure to adhere to the
statement in a WARNING message could result in personal injury.
