PXE6410 User Manual
Rev. 1.0
Confidential | 13
3
Installation
3.1
Installation Overview
This chapter contains information and instructions necessary to prepare the PXE6410 chassis for
operation. Details are provided for initial inspection, grounding safety requirements, repackaging
instructions for storage or shipment, and installation information.
3.2
Unpacking and Initial Inspection
Unpacking and handling of the device requires normal precautions and procedures applicable to handling
of sensitive electronic equipment. The contents of all shipping containers should be checked for included
accessories and certified against the packing slip to determine that the shipment is complete.
The PXE6410 chassis is supplied with:
•
Power cord with a plug according to customer country standard.
•
USB Type C cable for connecting a control PC to the instrument.
•
CD with WDS software, user manuals and instrument drivers.
Caution!
The PXE6410 chassis ships in an antistatic package to prevent damage from electrostatic
discharge (ESD). When storing the unit, use the antistatic case.
3.3
Safety Precautions
This product is intended for use by qualified persons who recognize shock hazards and are familiar with
the safety precautions required to avoid possible injury. The following sections contain information and
cautions that must be observed to keep the device operating in a correct and safe condition.
Caution
For maximum safety, do not touch the product, test cables, or any other instrument parts while
power is applied to the circuit under test. ALWAYS remove power from the entire test system
before connecting cables or jumpers, installing, or removing cards from the chassis. Do not touch
any object that could provide a current path to the common side of the circuit under test or
power line (earth) ground. Always keep your hands dry while handling the instrument.
Caution
Carefully read the Safety Precautions instructions that are supplied with your test fixtures. Any
adjustment, maintenance, and repair of an opened, powered-on instrument must be performed
by authorized service personnel.
