PXE6410 User Manual
Rev. 1.0
Confidential | 7
1
General
1.1
Scope
The scope of this manual is to describe the setup and operating procedures of the Tabor Electronics
PXE6410 PXIe based 6 slot Gen 3 x 4 chassis.
1.2
Related Documentation
•
Wave Design Studio User Manual
•
Proteus Programming Manual
•
Proteus Module User Manual
•
Lucid-X PXIe User Manual
1.3
Maintenance
Preventive Maintenance
No periodic preventive maintenance is required.
Long Term Storage or Repackaging For Shipment
If the instrument is to be stored for a long period of time or shipped immediately, proceed as directed
below. If you have any questions, contact your local Tabor Electronics representative or the Tabor
Electronics Customer Service Department.
Repack the instrument using the wrappings, packing material and accessories originally shipped with the
unit. If the original container is not available, purchase replacement materials.
Be sure the carton is well
sealed with strong tape or metal straps. Mark the carton with the model and serial number. If it is to be
shipped, show sending and return address on two sides of the box.
If the instrument is to be shipped for
service or repair, the following information must be included with the shipment:
•
Name and address of the owner.
•
Record the model and serial number of the instrument, options, and firmware version.
•
Note the problem and symptoms
–
detailed information will help in verifying the problem
•
What was the instrument setup, such as the run mode, arbitrary/task mode, task table etc.
•
Did the unit work; then fail or was it dead on arrival.
•
What other equipment was connected to the generator when the problem occurred, such
as external trigger or clock.
•
The name and telephone number of someone familiar with the problem who can be contacted
by Tabor Electronics if any further information is required.
•
Show the returned authorization order number (RMA) as well as the date and method of
shipment.
