4
2.6.
HOUSES STARTING POINT: (SEt HSF)
Press
to select the Housing start point by using
&
keys and Press
to save changes or Press
to discard and
go back.
Currently, up to 40 houses starting point can be selected from this menu.
2.7.
NUMBER OF BIRDS PER PEN: (SEt nbP)
Press
to select the Number of Birds per PEN by using
&
keys and Press
to save changes or Press
to discard
and go back.
Up to 255 Birds per PEN can be selected from this menu.
2.8.
NUMBER OF PENS PER HOUSE: (SEt nOP)
Press
to select the Number of PEN in house, and by using
&
keys and Press
to save changes or Press
to
discard and go back.
Up to 12 Number of PEN can be selected from this menu.
2.9.
STABILIZATION TIME: (SEt Stb)
Press
to select the Stabilization Time, and by using Arrow keys (
) to select desired time. Press
to save
changes or Press
to discard and go back.
2.10.
CLEAR PEN
To clear the old readings from a selected pen, and get the pen ready for new readings.
Press
to discard the process and go back. Press
to proceed, It will ask for confirmation.
If not sure Press
to cancel and go back. Press
to Clear the memory.
(Clear done screen will be shown for two seconds, and then the Main screen will appear)
2.11.
CLEAR DATA (Clean Memory Complete)
To clear the old readings from all pens, and get the scale ready for new readings.
Press
to discard the process and go back. Press
to proceed, It will ask for confirmation.
If not sure Press
to cancel and go back. Press
to Clear the memory.
(Clear done screen will be shown for two seconds, and then the Main screen will appear)
2.12.
CALIBRATION
To calibrate the weighing scale, first (Tare or Zero) the readings on the main screen, then using this setting, select
the calibration weight using
&
keys, then Press
key to proceed or
to discard.
(e.g 3000 means 3Kg)
To proceed, apply the selected weight to scale by putting calibrated weight in Pan. To discard or cancel the process press
to
stop calibration. To proceed with the calibration press
. It will ask for confirmation.
