Tach-It Mini-Con, Operation Manual

3 

SECTION #1 CAUTION: 



Before operating the machine, read the complete operator manual. 



Never have the power on this machine plugged into the power supply when any of the covers  

of the machine have been removed. 



Install and operate this machine only on a flat, level and dry surface. 



Use only the manufacturers specified electrical power input with this machine. 



Always keep hands, clothing, jewelry, and hair away from all moving parts of this machine including the 
Conveyor belt. 



Do not operate this machine with any of the protective covers removed or opened. 



Do not operate this machine without the pressure sensitive labels in their proper feeding position. 



Keep this machine clean and dry at all times. 



Do not use the machine in an area where flammables, explosive materials or fumes are present. 



Any modification to the machine makes the warranty null and void. 



Service on this machine should only be performed by factory trained authorized service personnel. 



Never use this machine for other than its intended applications.  Use of the machine on unintended  
applications can cause harm to the operator, the machine, and the product.  Please contact the manufacturer if 
there are any questions to whether this machine can be used for a particular application. 

SECTION #2 SPECIFICATIONS: 

Electric Power: 

115 VAC 

Machine Length: 

57” (145cm) (includes stainless stations) 

Machine Width for Mini-Con: 

18” (47cm) 

Machine Width for Mini-Con-S: 

38” (96 cm) 

Machine Height for Mini-Con: 

36” (93cm) 

Machine Height for Mini-Con-S: 

20” (51 cm) 

Label Size Maximum: 

5.1” (130mm) Wide x 11” (280mm) Long 

Label Size Minimum: 

.40” (10mm) Wide x .75” (20mm) Long 

Label Speed Maximum: 

59.1 Ft (18 meters) per minute 

Label Speed Minimum 

46 Ft (14 meters) per minute 

Conveyor Width 

10.6” (270mm) 

Conveyor Length 

39.4” (1 meter)