●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
4.
●
●
●
●
●
●
●
●
●
5.
Your cable drum machine has six beneficial tool attachments to cope with wide variety of obstructions.
PROPER MACHINE OPERATION
Cleaning chemicals can be present in clogged drains. If you have previously used chemicals or are
unsure, take precise care to avoid contact with the cable or debris found in the drain.
Machine is designed to be used by one person only. The operator must control both the cable and
the foot switch. If the cutter stop rotating, the operator must be able to turn the motor off. This helps
to prevent kinking and breaking of the cable which could cause crushing or injuries.
Do not allow the cable to twist, kink or build up tension. Do not let the cable endure overstressed
situations. This could potentially result in crushing and/or injuries. If the cable started to becomes
overstressed, turn the machine off immediately and rotate the cable in the opposite direction until
the twist or buckle has been removed.
Do not operate machine with motor in reverse. Reverse is only used when the cable is stuck or
overstressed. Running the machine in reverse could result in possible kinked or stressed cable and
potential injury.
Never retract the cable from the inlet while drum is spinning. The cable could whip around and
cause serious injury and possible death.
Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious personal injury.
Wear snug fitting leather gloves when operating this machine. Never grasp the rotating cable with
anything else, including a rag or non-leather gloves.
Wear safety glasses or eye protection
Exercise cleanliness. Use not soapy water to clean hands and other body parts that may have been
exposed to drain cleaning contents. Do not eat or smoke while cleaning drain, this will aid the
prevention of contamination with toxic or infections materials.
TOOL DESCRIPTION
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Spade Cutter
For cutting and scraping
C-Cutter
For grease stoppages and cleaning pipe walls
Boring Bulb Cutter
For removing loose objects
Side Cutter
For finishing pipe cleaning
SAW TOOTH CUTTER
For clearing any stoppage, roots, rags, sticks, etc.
Drop Head Auger
For cleaning back to back mounted fixtures e.g., sinks
where cable needs to be led into down pipe.
●
●
●
●
●
●
●
●
●
- 03 -
