background image

LIMITED WARRANTY STATEMENT

Taco, Inc. will repair or replace without charge (at

the company’s option) any Taco High Efficiency

circulator or circulator part which is proven defec-

tive under normal use within three (3) years from

the date of manufacture.
In order to obtain service under this warranty, it

is the responsibility of the purchaser to promptly

notify the local Taco stocking distributor or Taco

in writing and promptly deliver the subject product

or part, delivery prepaid, to the stocking distribu-

tor. For assistance on warranty returns, the pur-

chaser may either contact the local Taco stock-

ing distributor or Taco. If the subject product or

part contains no defect as covered in this war-

ranty, the purchaser will be billed for parts and

labor charges in effect at time of factory exami-

nation and repair.
Any Taco product or part not installed or operated

in conformity with Taco instructions or which has

been subject to misuse, misapplication, the addi-

tion of petroleum-based fluids or certain chemi-

cal additives to the systems, or other abuse, will

not be covered by this warranty.

If in doubt as to whether a particular substance

is suitable for use with a Taco product or part, or

for  any  application  restrictions,  consult  the

applicable  Taco  instruction  sheets  or  contact

Taco at (401-942-8000).
Taco reserves the right to provide replacement

products and parts which are substantially similar

in  design  and  functionally  equivalent  to  the

defective product or part. Taco reserves the right

to make changes in details of design, construc-

tion, or arrangement of materials of its products

without notification.

TACO OFFERS THIS WARRANTY IN LIEU OF
ALL  OTHER  EXPRESS  WARRANTIES.  ANY
WARRANTY  IMPLIED  BY  LAW  INCLUDING
WARRANTIES  OF  MERCHANTABILITY  OR
FITNESS IS IN EFFECT ONLY FOR THE DURA-
TION  OF  THE  EXPRESS  WARRANTY  SET
FORTH IN THE FIRST PARAGRAPH ABOVE.
THE  ABOVE  WARRANTIES  ARE  IN  LIEU  OF

ALL  OTHER  WARRANTIES,  EXPRESS  OR
STATUTORY,  OR  ANY  OTHER  WARRANTY
OBLIGATION ON THE PART OF TACO.
TACO  WILL  NOT  BE  LIABLE  FOR  ANY  SPE-
CIAL,  INCIDENTAL,  INDIRECT  OR  CONSE-
QUENTIAL DAMAGES RESULTING FROM THE
USE OF ITS PRODUCTS OR ANY INCIDENTAL
COSTS  OF  REMOVING  OR  REPLACING
DEFECTIVE PRODUCTS.

This warranty gives the purchaser specific rights,

and the purchaser may have other rights which

vary  from  state  to  state.  Some  states  do  not

allow limitations on how long an implied warranty

lasts or on the exclusion of incidental or conse-

quential damages, so these limitations or exclu-

sions may not apply to you.

8

SHADED AREA IS
VARIABLE SPEED
OPERATING RANGE

VT2218 PERFORMANCE CURVES

Summary of Contents for 00e VT2218 Series









Reviews: