background image

iWorx® ZXU1

20

 

502-007, Effective: May 30, 2013 

© 2013 Taco Electronic Solutions, Inc.

iWorx® products shall only be used for the applications identified in the product specifications and for no other purposes. 
For example, iWorx® products are not intended for use to support fire suppression systems, life support systems, critical 
care applications, commercial aviation, nuclear facilities or any other applications where product failure could lead to injury 
to person, loss of life, or catastrophic property damage and should not be used for such purposes.

Taco Electronic Solutions, Inc. will not be responsible for any product or part not installed or operated in conformity with the 
Document and instructions or which has been subject to accident, disaster, neglect, misuse, misapplication, inadequate 
operating environment, repair, attempted repair, modification or alteration, or other abuse. For further information, please 
refer to the last page of this Document for the company’s Limited Warranty Statement, which is also issued with the product 
or available at www.taco-hvac.com.

APPLICABLE DOCUMENTATION

Notes:

Description

Audience

Purpose

iWorx® ZXU1 Application Guide

, Doc-

ument No. 505-007

– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user

Provides application information for setting up 
and using the iWorx® Local Control Interface, 
including sequence of operation.

iWorx® LCI2 Application Guide

, Doc-

ument No. 505-002

– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user

Provides instructions for setting up and using 
the iWorx® Local Control Interface.

iWorx® LCI2 Quick Start

, Document 

No. 502-002a

– Application Engineers
– Installers
– Service Personnel
– Start-up Technicians
– End user

Provides instructions for setting up and using 
the iWorx® Local Control Interface.

http://www.iWorxWizard.com

– Application Engineers
– Wholesalers
– Contractors

An on-line configuration and submittal package 
generator based on user input. Automatically 
generates bill of materials, sequence of opera-
tions, flow diagrams, wiring diagrams, points 
and specifications.

Additional 
Documentation

LonWorks FTT-10A Free Topology Transceiver User’s Guide,

 published by Echelon Corpo-

ration. It provides specifications and user instructions for the FTT-10A Free Topology Trans-
ceiver. See also: www.echelon.com/support/documentation/manuals/transceivers.

Summary of Contents for iWorx ZXU1

























Reviews: