background image

SEAL SPRING

BODY GASKET

SEAL RETAINER

CASING

MOTOR ASSEMBLY

FACE PLATE

ROTATING SEAL

IMPELLER

BODY BOLTS (4)
TORQUE TO
65 15 IN-LBS

STATIONARY SEAL

2400 (3P MODELS)

Fig. 2: Exploded View of Pump

LIMITED WARRANTY STATEMENT

Taco,  Inc.  will  repair  or  replace  without  charge

(at the company’s option) any Taco 2400 Series

circulator  or  circulator  part  which  is  proven

defective  under  normal  use  within  three  (3)

years from the date of manufacture.
In order to obtain service under this warranty, it

is the responsibility of the purchaser to promptly

notify the local Taco stocking distributor or Taco

in writing and promptly deliver the subject product

or part, delivery prepaid, to the stocking distribu-

tor. For assistance on warranty returns, the pur-

chaser may either contact the local Taco stock-

ing distributor or Taco. If the subject product or

part contains no defect as covered in this war-

ranty, the purchaser will be billed for parts and

labor charges in effect at time of factory exami-

nation and repair.
Any Taco product or part not installed or operated

in conformity with Taco instructions or which has

been subject to misuse, misapplication, the addi-

tion of petroleum-based fluids or certain chemi-

cal additives to the systems, or other abuse, will

not be covered by this warranty.
If in doubt as to whether a particular substance

is suitable for use with a Taco product or part, or

for  any  application  restrictions,  consult  the

applicable  Taco  instruction  sheets  or  contact

Taco at (401-942-8000).
Taco reserves the right to provide replacement

products and parts which are substantially similar

in  design  and  functionally  equivalent  to  the

defective product or part. Taco reserves the right

to make changes in details of design, construc-

tion, or arrangement of materials of its products

without notification.

TACO OFFERS THIS WARRANTY IN LIEU OF

ALL  OTHER  EXPRESS  WARRANTIES.  ANY

WARRANTY  IMPLIED  BY  LAW  INCLUDING

WARRANTIES  OF  MERCHANTABILITY  OR

FITNESS IS IN EFFECT ONLY FOR THE DURA-

TION  OF  THE  EXPRESS  WARRANTY  SET

FORTH IN THE FIRST PARAGRAPH ABOVE.
THE ABOVE WARRANTIES ARE IN LIEU OF

ALL  OTHER  WARRANTIES,  EXPRESS  OR

STATUTORY,  OR  ANY  OTHER  WARRANTY

OBLIGATION ON THE PART OF TACO.
TACO  WILL  NOT  BE  LIABLE  FOR ANY  SPE-

CIAL,  INCIDENTAL,  INDIRECT  OR  CONSE-

QUENTIAL DAMAGES RESULTING FROM THE

USE OF ITS PRODUCTS OR ANY INCIDENTAL

COSTS  OF  REMOVING  OR  REPLACING

DEFECTIVE PRODUCTS.

This warranty gives the purchaser specific rights,

and the purchaser may have other rights which

vary  from  state  to  state.  Some  states  do  not

allow limitations on how long an implied warranty

lasts or on the exclusion of incidental or conse-

quential damages, so these limitations or exclu-

sions may not apply to you.

TACO, INC.

, 1160 Cranston Street, Cranston, RI 02920    Telephone: (401) 942-8000    FAX: (401) 942-2360.

TACO (Canadá), Ltd.

, 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8.    Telephone: 905/564-9422.    FAX: 905/564-9436.

Visit our web site at: 

http://www.taco-hvac.com

Printed in USA

Copyright 2015

TACO, Inc.

Summary of Contents for 2400 Series

Page 1: ...anion flanges on threaded pipe ends to ensure proper fit up and leak protection See Table 1 for companion flange set specifications 2 Minimize pipe strain on pump by using pipe hangers on Instruction Sheet 2400 Series Hi Capacity Circulator 102 361 SUPERSEDES December 19 2014 EFFECTIVE March 2 2015 Plant ID 001 3932 INSTALLER Please leave these instructions for owner s use CAUTION Taco 2400 Series...

Page 2: ...port suspend or brace pump motor or early failure may result Support provided by casing is sufficient for structural integrity of pump Fig 1 Installation Positions Models Connection 3 4 1 11 4 11 2 2 21 2 3 2400 10 3P 2400 20 3P 2400 45 3P 2400 50 3P Iron NPT 110 251F 110 252F 110 253F 110 254F Stainless Steel NPT 110 251SF 110 252SF 110 253SF 110 254SF Bronze Sweat 110 523BSF 110 524BSF 110 525BS...

Page 3: ...a 3 piece rotating seal 5 Remove the face plate from the motor housing To remove face plate gently pry it away from the housing 6 Remove the old seal seat and cup Lubricate the new cup with soapy water and install new parts in the face plate recess Replace the face plate to its original posi tion Carefully tap the face plate evenly into the recess in the motor housing 7 Clean the impeller shaft be...

Page 4: ... any application restrictions consult the applicable Taco instruction sheets or contact Taco at 401 942 8000 Taco reserves the right to provide replacement products and parts which are substantially similar in design and functionally equivalent to the defective product or part Taco reserves the right to make changes in details of design construc tion or arrangement of materials of its products wit...

Reviews: