Gallant User Manual
| 51
Alerts (Continued)
Motor Hall Sensor:
This icon indicates the hall sensors did not
change state correctly.
In the unlikely situation where the control system has detected an
incorrect motor sensor sequence, please contact your retailer
for repairs.
Over-temperature:
The over-temperature icon appears if:
• the machine is being stressed by an obstruction
• the machine is stitching through extremely difficult fabric to sew, or
• the machine is operating in a hot environment.
Power off the machine and allow it to cool down. If the problem
persists, contact your retailer.
Magnetic Encoder:
T
his icon indicates a problem with the main shaft
position sensor.
Please contact your retailer for service.
