CAUTION
CAUTION
34
Tact Audio
Front Panel > Main Menu
POL menu
The test menu is designed to allow for a quick system check. When engaged it
will produce pink noise on all selected channels. When a channel is set to “Y”
pink noise will be heard from that channel when “Run Test” is selected.
TEST menu
Tttt
Use this screen to set individual channel polarity and absolute channel polarity.
Each channel can be set to “+” (0) or “-” (inverted).
To select an option use the “UP” and “DOWN
Tttt
Tttt
” navigational buttons and to
Tttt
Tttt
change its value press the “ENTER” button to toggle between a “+” or “-” setting.
If all channel options are set to ‘+’ or all channel options are set to ‘-’, all output
signals will come out in phase. If one channel is set to ‘+’ and another channel is
set to ‘-’ their respective output signals will be out of phase.
ABS POL option (absolute polarity) will fl ip the phase on all channels.
To highlight an option use the the “UP” and “DOWN” navigational buttons and
then press the “ENTER” button to make your selection. After all selections are
made, highlight the “Run Test” option and hold down the “ENTER” button to
produce the test signal. The test tone will stop when the “ENTER” button is re-
leased. Press the “MENU” button to exit this menu.
Summary of Contents for RCS 2.2 XP
Page 1: ...Owner s Manual RCS 2 2 XP Preampli er Dynamic Room Correction System...
Page 2: ......
Page 19: ...19 Tact Audio...