43
Tact Audio
Front Panel > Correction Menu
Use this screen to view the symbolic names assigned to each preset number.
NAMES menu
Use the UP and DOWN buttons to place the screen cursor on desired option.
Press the enter button to engage the selected correction preset.
Use this screen to set RCS 2.2 XP crossover parameters.
CRO menu
To highlight a menu option use the navigational buttons. To select a highlighted
option press the “ENTER” button.
1.
Use this option to set low-pass fi lter order. This option can be set from 1
to 24.
2.
Use this option to set the low-pass fi lter cutoff frequency. Minimum fre-
quency is 40 Hz and maximum frequency is 500 Hz.
3.
Use this option to set the high-pass fi lter order. This option can be set
from 1 to 12
4.
Use this option to set the high-pass fi lter cutoff frequency. Minimum fre-
quency is 40 Hz and maximum frequency is 500 Hz.
5.
Place the cursor on this option and press the ENTER button to turn the
crossover fi lters ON or OFF.
6.
Click on this option to engage selected crossover fi lters.
7.
Displays the currect correction preset.
Summary of Contents for RCS 2.2 XP
Page 1: ...Owner s Manual RCS 2 2 XP Preampli er Dynamic Room Correction System...
Page 2: ......
Page 19: ...19 Tact Audio...
