Tactacam 6.0, Instruction Manual

18

TROUBLESHOOTING

HOW DO I TURN OFF MY CAMERA?

If your Tactacam is not connected to the Tactacam app for mobile, it will power off 

after 3 min when you stop recording. When your camera is connected to the app, Push 

the Rec/Power button for 5 seconds to turn off the camera. 

Note: 

the WiFi will also 

power off when camera is manually powered down. To turn off wireless and keep the 

camera on, press the WiFi/Mode button for 3 sec, the WiFi blue light will turn off (Solo 

WiFi press the Power/Record button for 3 sec), then press the Rec/Power button to 

start recording.

MY TACTACAM WON’T RESPOND WHEN I PRESS A BUTTON

Press and hold the Rec/Power button for about 5 seconds until your camera powers 

off. This reset saves all of your content. If that doesn’t work, open the back cap and 

remove the battery for 5 seconds. 

MY TACTACAM WON’T POWER ON

Make sure your Tactacam is charged. To charge your camera, use the included USB 

cable and a computer or wall charger. 

WHAT KIND OF SD CARD DO I NEED?

You need a Ultra 3 microSD card, at least 64GB for the Tactacam Solo, 3.0 and 4.0. 

Tactacam 3.0 and 4.0 will take up to a 64GB card. 5.0 will take up to 128GB. Your SD 

card is the heart of your camera, you can’t purchase a $430 camera and put a $6 SD 

card in it.

WHAT IS THE BEST SD CARD TO USE?

The best cards to use are Lexar Professional microSD cards. They are slightly more 

expensive than others and unlike many other cards from the SanDisk line and others, 

their cards are held to very high quality control standards and will likely last longer 

than the other cards.