MICO-PS-3P
26
4. Internet Printer Connection and HP Web
JetAdmin
IPP Overview
The MICO-PS-3P supports the Internet Printing Protocol (IPP). Using the appropriate
software on your system, you can create an IPP print path from your system as Windows PC
over the Internet.
Note:
For incoming print path requests, the network administrator have to configure the
firewall to accept incoming IPP requests.
Windows NT/2000/XP/2003
For Windows NT/2000/XP/2003, you can use a supported Web Browser, for example,
Netscape or IE to view the embedded web server on the print server. Contact your
administrator to get the IP address or URL of the printer and browse to the print server’s web
page.
For example, to install Windows 2000 by IPP service you must follow below information:
1.Click
Start
button.
2.Select
Settings
, and then select “
Printers
” option.
3.Click
Add Printer
icon. Appear welcome to the add printer wizard, Click
Next
.
4.Select
Network printer
option, and then click “
Next
”.
5.Select
Connect to a printer on the Internet or on your intranet
option, appear as follow
picture.
MICO-PS-3P
27
6.In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then
Click
Next
.
** lp1 is the queue name for print port-1, lp2 for print port-2 and lp3 for print port-3.
7.It will check print server to connect to HP printer, if not, it will appear as follow picture. Then
Click
OK
.
8. Select the appropriate printer manufacturer and printer type and click “
Next
”, appear as
follow picture.
