MICO-PS-3P
34
Name of the NDS Tree:
Name of the NDS Content:
Current Status:
Connect or Disconnect.
Use Bindery Mode:
Enable or Disable.
Name of the File Server:
Current Status:
Connect or Disconnect.
AppleTalk Status
1.Click
Status
, it then appears the sub-menu.
2.Click
AppleTalk
, it then as shown in the following picture.
AppleTalk Settings:
If no any zone exists, the print server itself displays the zone name as
an asterisk (
*
) in the current
AppleTalk Status
of the print server in the
web browser.
Port Name:
<
ATALK_PS
>
-xxxxxx-1
, where xxxxxx represents the last six digits of the print
server’s Node ID.
Printer Type:
This option allows you to view printer type from the print server. If you are
using a PostScript printer you can select the LaserWriter 8 icon from your Mac
computer.
Data Format:
This option allows you to view data format from the print server. If you are
using a PostScript printer you can select
ASCII
,
TBCP
or
BCP
format from
web configuration.
MICO-PS-3P
35
SNMP Status
1.Click
Status
, it then appears the sub-menu.
2.Click
SNMP
, it then as shown in the following picture.
SNMP Communities:
This option allows you to view SNMP communities from the print
server. There are two communities that control message from the
network management of the print server.
SNMP Traps:
This option allows you to view SNMP traps from the print server.
SMB Status
1.Click
Status
, it then appears the sub-menu.
2.Click
SMB
, it then as shown in the following picture.
