User Manual
T G W S IP -F X S /F S O G a te w a y S e rie s
36
Tadiran Telecom
Table 2-9
TLS&SRTP Configuration Parameter
Name
Description
TLS server
Set to the address of a softswitch or IMS platform that supports TLS. After the configuration, the TLS
function is automatically enabled but you should enable TLS on
Line
>
Configuration
or
Trunk
>
Configuration
page to apply it.
SRTP mode
Set to one of the following negotiation modes:
RTP only (fallback to SRTP for incoming calls)
: only RTP negotiation is used for outgoing calls,
but SRTP negotiation is also supported for incoming calls.
SRTP only (fallback to RTP for incoming calls)
: only SRTP negotiation is used for outgoing calls,
but RTP negotiation is also supported for incoming calls.
Both RTP&SRTP (RTP preferred for incoming calls
): both RTP and SRTP negotiations are
supported for outgoing calls, RTP negotiation is preferred for incoming calls.
Both RTP&SRTP (SRTP preferred for incoming calls
): both RTP and SRTP negotiation are
supported for outgoing calls, SRTP negotiation is preferred for incoming calls.
Disable
: Disable SRTP, support only RTP
Mandatory
: SRTP
2.2.8 MGCP (not relevant for operation under Aeonix)
The gateways use SIP protocol by default. When the gateways need to interface with MGCP protocol
-based softswitch platform, set the relevant parameters here.
After login, click
Basic
>
MGCP
to open the configuration interface.
MGCP Configuration Interface
Figure 2-10
Summary of Contents for aeonix TGW4
Page 15: ...Tadiran Telecom xv...
Page 16: ......
Page 133: ...T G W S IP F X S F S O G a te w a y S e rie s User Manual Tadiran Telecom 117...
