User Manual
T G W S IP -F X S /F S O G a te w a y S e rie s
72
Tadiran Telecom
Table 2-29
RADIUS Configuration Parameter
Name
Description
Primary Server
Define IP address and port number of preferred Radius server.
Note: if the port number is not yet configured, please use Radius default port number 1813.
Key
Set the share key to be used for encrypted communications between Radius client and server.
Note: The share key should be configured the same for both client and server side.
Secondary Server
Set the IP address and port number of standby Radius server. When an error occurs in
communications between gateway and preferred Radius server, the gateway will automatically
activate standby Radius server.
Note: In case of no configuration of port number, use default port number of 1813.
Key
The share key for communications between Radius client and standby Radius server.
Note: The key should be configured the same for both client and server side
Retransmit timer
Set the overtime on response after transmission of Radius message, the default is 3 seconds.
The retransmission will be performed If no response is given after the timeout.
Retransmit times
Set the times of retransmission of Radius message when no response is received. Default is 3
times.
CDR type
Set whether to send RADIUS charge message for
Outbound calls
Inbound calls
When calls are connected
Unanswered calls
2.6.8 Greeting
After login, click
Advanced
>
Greeting
to open the audio files interface.
Greeting Interface
Figure 2-34
Summary of Contents for aeonix TGW4
Page 15: ...Tadiran Telecom xv...
Page 16: ......
Page 133: ...T G W S IP F X S F S O G a te w a y S e rie s User Manual Tadiran Telecom 117...
