Coral FlexiCom 6000 Installation Manual
Cabinet Descriptions
6-19
Cabinet Descrip
tion
s
6
I/O connections to PUGW, UGW-E, UGW, IPG, or 30T/30TM/T1/PRI-23/PRI-30
(layout UDT or 2DT) peripheral cards are established via RJ-45 connectors mounted
on LDF or UDF panels. Four connectors per each LDF or UDF. The connection is
made from an RJ-45 connector on the front panel of a peripheral card via a crossover
cable that is routed to the LDF or UDF panel on the rear side of the Coral FlexiCom
6000 cabinet. See
.
Figure 6-16
Coral
FlexiCom 6000 RJ-45 I/O
Connections from Front
Panel to Rear Panel
The connections between the RJ-45 jack on the front panel of the PUGW, UGW-E,
UGW, IPG, or 30T/30TM/T1/PRI-23/PRI-30 (layout UDT or 2DT) peripheral cards
and the RJ-45 jacks on the LDF and UDF panels at the rear side of the cabinet are to
be made by a H624 crossover cable. The crossover cable ensures that the pinout order
from the peripheral cards remain constant from the front panel to the
LAN/WAN/PSTN/CSU/LTU connection, see
...................................................................................................
4
Input/Output RJ-45 Connections
UDF for PRI/T1/30T/30TM (layout UDT/2DT)
(Optional)
PUGW
T1/PRI/30T/30TM
(layout UDT/2DT)
LDF for MAP, CLA, PUGW, UGW-E, UGW, IPG
RJ-45 Cables
(
)
to Front Panels of
Peripheral Cards
Crossover
H624
(Cat. No. 7244-8000624)
