Hold
88
FlexSet 120/280 User Guide
Display Message
Key LED
To return to the call on multi-hold:
1. Press the lit
[HOLD]
key (see note 2) or dial #171.
The held calls are returned in “First In/ First Out” order.
C A L L H O L D
xxxxx
2. Then either: dial the required held party number
or
Press
to scroll through the hold list until the required number is
displayed.
3. Dial activation code .
A N S W E R
xxxxx
Notes:
1) This option can only be activated if allowed by system (auto active)
system-wide or the HOLD key is programmed by access code
#171 or followed by activation code .
2) This option can be activated by the HOLD key if allowed by system
(auto active not defined) system-wide and HOLD key is
programmed only by access code #171.
3) If you do not return to the call on hold within a predetermined
R E C A L L
xxxxx
F L A S H I N G
amount of time the call will automatically return to you.
4) If your telephone is programmed with Hard Hold the message
CALL ON HOLD will appear after you have placed a call on hold.
When Hard Hold is activated on a call your station will be
considered busy for additional incoming calls. However, outgoing
calls can still be made.
