Individual Remote System Services (Freedom) - IRSS
94
FlexSet 120/280 User Guide
Display Message
Key LED
To place a call from IRSS phone that does not provide Caller ID:
This applies for IRSS calls from off-site phones that do not possess a Caller ID
number and, therefore, cannot be identified by the Coral.
Notes:
1) Some telephones may be denied the Executive Privilege feature
(defined by Class Of Service).
2) In order to use Executive Privilege your station must be defined
with a passcode (see
page 131
).
1. Place a call to the Executive Privilege number (contact your system
administrator for that number).
2. Listen for the dial tone.
3. Dial your own Coral station number.
4. Dial your 4 digit passcode. Listen for the distinctive dial tone.
5. Dial the required destination number.
Possible destinations can be:
external number (stationary or cellular),
network number, or a Coral destination, including station, trunk/trunk group,
dial service, routing access, public/private library, voice mail
.
Note:
If your destination is an external number, it should be preceded by
an external line access code.
• If your destination is voice mail (IVR access code), skip to
page 98
.
• If your destination is a FlexiCall All feature, skip to
page 99
.
• To enable another IRSS phone, skip to
page 100
.
6. Listen for the ringback tone.
7. Wait for an answer.
8. You can activate any of the options described in the table on
page 95
.
