Individual Remote System Services (Freedom) - IRSS
93
FlexSet 120/280 User Guide
Display Message
Key LED
Placing IRSS calls
• For IRSS calls placed from phones that send Caller ID, the IRSS feature must
be enabled at your Coral station. See steps below.
• For IRSS calls placed from phones that do not send Caller ID information,
the IRSS feature must be enabled using the Executive Privilege feature. See
page 94
.
To place a call from IRSS phone providing Caller ID:
1. Place a call to your Coral station.
2. Listen for a distinctive dial tone.
3. Dial your 4 digit passcode (if required by Class of Service).
4. Listen for the dial tone.
5. Dial the required destination number.
Possible destinations can be:
external number (stationary or cellular),
network number, or a Coral destination, including station, trunk/trunk group,
dial service, routing access, public/private library, or voice mail
.
Note:
If your destination is an external number, it should be preceded by
an external line access code.
• If your destination is voice mail (IVR access code), skip to
page 98
.
• If your destination is a FlexiCall All feature, skip to
page 99
.
• To enable another IRSS phone, skip to
page 100
.
6. Listen for the ringback tone.
7. Wait for an answer.
8. You can activate any of the options described in the table on
page 95
.
