Appendix A – Glossary
A-3
FlexSet 120S/280S User Guide
FlexSet 40B
Programmable expansion module for the FlexSet 280S series telephone sets. Each
module provides an additional 40 programmable buttons.
Forced Account Code
A feature that forces the station user to dial an account code before having access to
an outside line. A display equipped keyset user attempting to access an outside line
without dialing the account code will receive the message “ENTER ACCOUNT #”
on the display. After dialing the account code, the user will be able to continue
dialing the intended number.
Idle
A station or extension that is not ringing or busy, therefore available for use.
Intercept
If you misdial or dial an unauthorized code (restricted to you), you will receive a
reorder tone or will be routed directly to the attendant/ operator/ master extension,
as defined in your system.
Off-Hook
Lifting the telephone handset from its cradle has the same effect as pressing a
preprogrammed
LOOP
,
LINE
or
SPKR
fixed key, but automatically inhibits the
Speakerphone facility. Off- hook provides the dial tone, which then enables you to
dial or activate a feature.
LINE
The line key is used for making and receiving calls when the station is defined as a
member of a boss group. When several line keys are in use, the station will act as if
it is a multi-line instrument.
LOOP
The loop key is used for making and receiving calls. When several loop keys are in
use the station will act as if it is a multi-line instrument.
On-Hook
Replacing the telephone handset on its cradle – has the same effect as pressing the
[Exit]
or
SPKR
key.
Outside Line Access Code
A series of digits which must be dialed or keyed in order to gain access to a trunk or
trunk group.
Port
Provides access to a device, station or trunk from within the system.
